Creality CR-Falcon Laser (5W) Media Edge Fixture 3D Printer Model
The file 'Creality CR-Falcon Laser (5W) Media Edge Fixture 3D Printer Model' is (stl) file type, size is 53.5KB.
The file 'Creality CR-Falcon Laser (5W) Media Edge Fixture 3D Printer Model' is (stl) file type, size is 53.5KB.
This fixture is for the Creality CR-Falcon Laser 5W. I wanted to be able to place the wood (or other media) right at the edge of the laser beam when at a 0,0 position. This came up as a need for me as I wanted to use an entire 150mm x 150mm (6" x 6") x 3mm piece of plywood as a plaque.
This fixture helped me center everything knowing where the edge of the wood was relative to the laser. It settles around the laser shroud with the wood squared up with the inside square cutout.
| CR-Laser_5W_Media_Edge_Fixture.stl | 169.7KB |
