**Update 29/03/24
toolboxfinal2.stl uploaded
New tools, new version.
2x M4x25mm bolt w/tnuts
~ 14h print, ~ 0.45kg of PLA
You will need 2x M5 25mm bolts with T-Nuts.
Remove some screws from the printer's base and slide the holder's left 'fin' between the base cover and the base itself. Reinstall screws
It should work but not have been tested so far. Cut and remove the fin if it was not a good idea at all ;)
Fusion360 .f3d files included if you want to remix something for your specific tools
There are specific holes in my tool holder for those things:
LCD Cover
https://www.thingiverse.com/thing:3442064
CR10s pro Dual Z alignment tool
https://www.thingiverse.com/thing:3493399
As soon as I receive my ERYONE Galaxy Red PLA, I will add picture of the final printed tool holder attached to the printer.
https://www.amazon.ca/-/fr/gp/product/B07Z4JKD46/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
| Crealitylogo.stl | 1.4KB | |
| ToolBox.f3d | 260.8KB | |
| ToolBoxFinal.stl | 810.4KB | |
| ToolBoxFinal2.stl | 176.9KB |
