Elegoo Saturn Resin Printer, used on standard settings for Grey ABS like Resin.

Modelling all done in Tinkercad.
Can be printed straight on the build plate, or if you normally use a Raft or Supports your slicer software should be able to provide those for you.

18th Dec 2021.. Edit: I've found it necessary to add a Raft And Supports when printing this model "in particular at the corners" where the model seemed to nearly always peel away when printing direct on the build plate, I recommend you place heavy supports in the corners and medium supports everywhere else on the bottom. (if you are using a resin 3D printer)

The Textured surfaces really lend themselves to Oil Pin Wash and/or Dry Brushing for a "Very" realistic Wood Grain Effect

As its a solid model I'm assuming it will print on FDM printers But cant make any guarantees over this.

I am using Lychee Pro Slicer, and can resize this model to any size compatible with the project I'm involved with. The Thumbnails below are all the same model resized in my slicing software.

Please don't ask me questions in regard to Chitubox, slicer, I only used it for a few days and therefore cant honestly give any decent answers to you.