Crappy Piggy Bank V2 3D Printer Model
The file 'Crappy Piggy Bank V2 3D Printer Model' is (stl) file type, size is 21.9MB.
The file 'Crappy Piggy Bank V2 3D Printer Model' is (stl) file type, size is 21.9MB.
Second version of my crappy model
V2 is with better models (optimized, some parts redesigned etc.) and with more options - more about changes below
If you want to sell prints of this models you can buy a commercial license here:
https://cults3d.com/en/3d-model/home/crappy-piggy-bank-v2-commercial-license
- BANK - as piggy bank, flush is opening the seat - default and recommended settup
- SECRET - normal box with another secret stash under top cover - no hole for coin
- BANK-no-flush - as piggy bank without opening mechanism
- SECRET-no-flush - same as SECRET but without a flush and with more space in secret stash
- BANK-SOLID - solid model of piggy bank, only one part. You will need to break it to gather coins from the inside. - WARNING: print needs a good cooling to look good
All models, except BANK-SOLID, is also in BIG version wich is optimized 150% size of original model - better resolution, with walls still the same thickness as original (wich is 4x 0.4mm). You can resize it bigger if you want
If you want a model between 100% and 150% size you should resize original model up, not BIG model down
You will need a 1cm of 1.75 filament for each hindge. It will work without any glue
OR two printed rods (in files)
You can use SECRET with a cover with a hole (BANK_cover) to use as a small piggy bank and bigger storage under seat for something else
There are 4 versions of cover
Seat is in two versions, original, more rounded, and streight wich is more ‘blocky’ but elegant
In ‘ALL’ there is original model
No-flush base models can be used only with no-flush seat models
Printed spring is not needed for mechanism to work, but it may help a little. You can change it for a spring from a pen too if you want
Video with printing timelapse, assembling and using
https://www.instagram.com/p/Cz4FUv5NW8R/
V2 vs V1
UPDATE 23 XI 2023
Added 2 new versions of cover with bigger hole (as big as space below)
UPDATE 24 XII 2023
Added a photos of BIG print
Updated BIG_seat models. It was not completely flat so it could cause imperfections on top layer
| ToiletBox-v2-BIG_BANK-no-flush_base.stl | 4.4MB | |
| ToiletBox-v2-BIG_BANK_base.stl | 4.2MB | |
| ToiletBox-v2-BIG_BANK_cover-big-hole.stl | 21.5KB | |
| ToiletBox-v2-BIG_BANK_cover-big-hole_no-flush.stl | 21.5KB | |
| ToiletBox-v2-BIG_BANK_cover.stl | 21.4KB | |
| ToiletBox-v2-BIG_flush.stl | 9.7KB | |
| ToiletBox-v2-BIG_rod.stl | 9.7KB | |
| ToiletBox-v2-BIG_seat-no-flush.stl | 786.5KB | |
| ToiletBox-v2-BIG_seat-streight-no-flush.stl | 1001.1KB | |
| ToiletBox-v2-BIG_seat-streight.stl | 1.0MB | |
| ToiletBox-v2-BIG_seat.stl | 816.2KB | |
| ToiletBox-v2-BIG_SECRET-no-flush_base.stl | 4.3MB | |
| ToiletBox-v2-BIG_SECRET_base.stl | 4.1MB | |
| ToiletBox-v2-BIG_SECRET_cover.stl | 20.4KB | |
| ToiletBox-v2-BIG_spring-optional.stl | 55.6KB | |
| ToiletBox-v2_BANK-no-flush_ALL.stl | 1.8MB | |
| ToiletBox-v2_BANK-no-flush_base.stl | 1.5MB | |
| ToiletBox-v2_BANK-SOLID.stl | 2.1MB | |
| ToiletBox-v2_BANK_ALL.stl | 1.9MB | |
| ToiletBox-v2_BANK_base.stl | 1.5MB | |
| ToiletBox-v2_BANK_cover-big-hole.stl | 21.5KB | |
| ToiletBox-v2_BANK_cover-big-hole_no-flush.stl | 21.5KB | |
| ToiletBox-v2_BANK_cover.stl | 21.4KB | |
| ToiletBox-v2_flush.stl | 9.7KB | |
| ToiletBox-v2_rod.stl | 9.7KB | |
| ToiletBox-v2_seat-no-flush.stl | 260.9KB | |
| ToiletBox-v2_seat-streight-no-flush.stl | 329.8KB | |
| ToiletBox-v2_seat-streight.stl | 350.4KB | |
| ToiletBox-v2_seat.stl | 271.7KB | |
| ToiletBox-v2_SECRET-no-flush_ALL.stl | 1.8MB | |
| ToiletBox-v2_SECRET-no-flush_base.stl | 1.5MB | |
| ToiletBox-v2_SECRET_ALL.stl | 1.9MB | |
| ToiletBox-v2_SECRET_base.stl | 1.5MB | |
| ToiletBox-v2_SECRET_cover.stl | 20.4KB | |
| ToiletBox-v2_spring-optional.stl | 55.6KB |
