Platform to enable Brio trains and toy cars to be lifted with a toy crane.
The electric Brio train we have can drive on to the platform as long as the platform is held in place by hand.
Small ridges for both train and cars to prevent them from rolling off if weight distribution isn't completely centered.
Filament: PLA+ aprox. 30-40g depending on settings.
Recomended to print with enough walls to make struts solid.
Layer height: 0,2mm
Prints fine without supports, the bridging at the top can sag a little bit but isn't an issue strength wise.
Printed on Bambulabs P1S just under 2h with standard 0.2mm profile.
| Lyftplattform_bilar_och_tåg.3mf | 135.3KB | |
| Lyftplattform_bilar_och_tåg.stl | 72.9KB |
