CR250 Dash Cam Mount Bracket For 2024 Jeep Gladiator 3D Printer Model
The file 'CR250 Dash Cam Mount Bracket For 2024 Jeep Gladiator 3D Printer Model' is (stl) file type, size is 10.8KB.
The file 'CR250 Dash Cam Mount Bracket For 2024 Jeep Gladiator 3D Printer Model' is (stl) file type, size is 10.8KB.
Dashboard mounting bracket specifically for the Crosstour Car Recorder CR250 dash cam to fit in the existing dashboard mounting bolt holes in a '24 Jeep Gladiator. I would imagine this will probably work in a '24 Jeep Wrangler as well. This will only work with this specific dashcam model, unless yours just happens to have the exact same mounting bracket shape.
I don't know about previous year models since there was an interior refresh with the '24 model, but if you want to verify you can measure the distance between the mounting bolt holes: 30mm distance between bolts left - right, and 38mm distance between bolts front - back.
Recommend either M5 x 8mm or 10mm length bolts for mounting. Do not over-tighten screws, remember this is plastic. If you decided to go with a solid infill then you could tighten a bit more, I'm only using 10% infill because this dashcam is very light and shouldn't need much to hold it in place.
I will try to come back and update after enough time has passed and it has more miles on it and provide any updates or adjustments that may be necessary.
| dash_cam_mount_v3.stl | 50.7KB |
