CR10 Max Y Axis MGN12H Linear Rail Bracket 3D Printer Model
The file 'CR10 Max Y Axis MGN12H Linear Rail Bracket 3D Printer Model' is (stl) file type, size is 51.2KB.
The file 'CR10 Max Y Axis MGN12H Linear Rail Bracket 3D Printer Model' is (stl) file type, size is 51.2KB.
Here is a bracket i designed for converting my CR10 Max to linear rails on the Y axis.
No modification to the bed is needed!
The bracket uses alignment tabs on the six big holes on the bed (three on each side)
You will need to source six DIN ISO 7380-1 M5x20 mm bolts or cut down the standard bolts.
The rest of the stock mounting hardware can be reused.
For the MGN12H carriages you will need sixteen M3x12mm bolts.
I printed the brackets in PETG-CF
Y axis end stop has to be relocated i recommend using this model.
| vinkel-beslag.stl | 213.3KB |
