video: https://youtu.be/_vbSY6MJWI8
-This mount is designed to fit the Logitech C270 onto the Creality CR-10 print bed. This may also fit other 3D printers with a similar design to the CR-10.
--------------------- Material used-----------
6-32 x 3/4" screw and nut (to mount camera) I bought this at Home Depot. Just make sure the nut has thin walls. If not, you might have to file it down a bit.
USB Extension Cables
https://www.amazon.com/dp/B00N9HRUJU/ref=twister_B07CR6K859?_encoding=UTF8&psc=1
*** you can try other USB extension cables just make sure it fits the dimensions I posted above. For this mount, you would want a female USB with a THIN SHELL.
-The reason why I chose to do a USB mount is that it makes it easy to swap out LEDs. Switching to single, double, triple, or even different colors is a breeze with the USB LEDs.
-I didn't add any wire management slots/clips on this mount for the USB cable. I figured zip ties will work, however, if you guys think it's necessary then let me know!
Hope you guys enjoy!
| C270_Mount_with_USB_delSLOT.STL | 39.3KB |
