CR-6 Se Push-in V-slot Covers (minimalist) 3D Printer Model
The file 'CR-6 Se Push-in V-slot Covers (minimalist) 3D Printer Model' is (stl) file type, size is 5.0KB.
The file 'CR-6 Se Push-in V-slot Covers (minimalist) 3D Printer Model' is (stl) file type, size is 5.0KB.
There aren't nearly as many places to put these covers on the CR-6 se as there is for the Ender 3, but at least it's something.
I titled the files by where they should go, so it should be pretty self-explanatory.
*If you want the front and rear of the middle section to be covered, print the middle set twice.
*If your spool holder is clipped on the rear side, print the middle set three times, as one set can just go to front left. **You'll only need one of the rear pieces if your spool holder is clipped back there (BackSingle).
| Push-in_V-slot_covers_-_BackLeft.stl | 7.1KB | |
| Push-in_V-slot_covers_-_BackSingle.stl | 3.6KB | |
| Push-in_V-slot_covers_-_FrontLeft.stl | 7.1KB | |
| Push-in_V-slot_covers_-_Middle.stl | 7.1KB |
![CadetYoke V2.0 [Open-Source Yoke For Flight Simulators] 3D Printer Model](https://cdn.3axis.co/assets/74/d6/01/aa/74d601aa-5153-4f25-bb8a-85d79b92292c/images/e3bb804f-b779-4e1a-b682-bbf658569414_thumb.jpg)
