Simple, yet modular, design for a web camera mount. I built it for the CR-6 Max, but should work okay for any of the Creality printers assuming you have a decent place to mount it where the bed, head or otherwise won't impact it.
It uses the standard mounting screw for most cameras (1/4 in). Because of this you can use it with most web cameras. On a CR-6 Max it works very well in the back right corner where it is out of the way and far enough away to get great focus.
This was printed on the CR-6 MAX right out of the box, so tolerances are set for that. If something doesn't work I did include the step file for you to modify at your own risk!
The clamp grabs very strong, so I added a bit of a ledge to give you something to pry against to get it off. You can place the included allen keys under it and pry to remove the clamp.
| Clamp.stl | 103.6KB | |
| CR-6_Webcam_Mount_v1.step | 811.3KB | |
| Nut.stl | 583.7KB | |
| Screw.stl | 2.8MB | |
| Stand.stl | 57.6KB |
