CR-10S Pro Printhead And Fan_duct 3D Printer Model
The file 'CR-10S Pro Printhead And Fan_duct 3D Printer Model' is (stl) file type, size is 152.4KB.
The file 'CR-10S Pro Printhead And Fan_duct 3D Printer Model' is (stl) file type, size is 152.4KB.
These two 3D-Models are still in Progress.
Please let me know if you had any problems printing them or if I should redesign them.
Print the Printheads with these support settings:
Placement: everywhere
Angle: 60
Density: 1%
Thickness: 0.2
You don't need support for the Fan_ducts.
Use the normal hotend fan for the printhead.
And 2X 40mm fans for fan_duct.
| v1_fan_duct.stl | 179.2KB | |
| v1_printhead.stl | 71.6KB | |
| v2_fan_duct.stl | 158.5KB | |
| v2_printhead.stl | 73.7KB |
