CR-10S Large Spools Holder 3D Printer Model Free Download

Description Files (3)

Summary

Remixed a remix to allow me to use larger spools. This one allows me to hold 3.5KG Spools. I love the design where it attaches and holds onto the control unit with the original screw pattern. I just took this and modified it greatly to hold bigger spools.

Final Pictures of the setup coming soon.

Notes:

TAB File allows the unscrewed holder to stay centered on the control panel.
The Screw holder locks down and makes sure the entire unit doesn't move completely off the control box while printing.
The distance from the center of the roller bearing mounts is 177mm, use this as a reference to see how small of a spool will fit.
Uses regular 608 Bearings.
You will need to print one of the Screw mount side and 3 of which ever free side you'd like. Tabs or Tab-less.
Supports only needed on the screw side part.

If you like the design, feel free to send a tip using Crypto's!
Bitcoin Tip Address : 1FEMcSdY19L1BNiLzkfc8eySGdrhqyf4Pu
BitcoinCash Tip Address : 1A4cUAZa23mg95REeUQLhac8wDDJcGvaBb
Litecoin Tip Address : LLsy8pfTRThVpQmsjUTMtJmsGrcpqFdNYd
Ethereum Tip Address : 0x6814b3584bef4bb2bbf8250fb93dfcff36036c10

CR-10_Spool_Holder_-_LARGE_SPOOLS.stl	78.1KB
CR-10_Spool_Holder_-_LARGE_SPOOLS_-_TABS.stl	76.1KB
CR-10_Spool_Holder_with_Screw_-_LARGE_SPOOLS.stl	190.0KB

CR-10S Large Spools Holder 3D Printer Model

Summary

Tags

You might also like