CR-10 V2 Wire Strain Relief 3D Printer Model
The file 'CR-10 V2 Wire Strain Relief 3D Printer Model' is (stl) file type, size is 608.1KB.
The file 'CR-10 V2 Wire Strain Relief 3D Printer Model' is (stl) file type, size is 608.1KB.
The CR-10 V2 has a lot of great upgrades from the original CR-10, but the wire harness needs a strain relief. As designed the wire harness attached to the gantry assembly is hanging from the connector, likely pulling on the wires on the ends.
This design slips on easily and gives a little more support for the wire harness, taking stress off the wires on the ends of the connector.
If this works for you, feel free to tip me if you feel so inclined :)
| strainrelief.stl | 1.4MB |
