CR-10 Smart Mod For K1 Max Magnetic Plate 3D Printer Model
The file 'CR-10 Smart Mod For K1 Max Magnetic Plate 3D Printer Model' is (STL) file type, size is 12.4KB.
The file 'CR-10 Smart Mod For K1 Max Magnetic Plate 3D Printer Model' is (STL) file type, size is 12.4KB.
Since I have a K1 Max printer and the bed size is the same as the CR-10 Smart, I wanted to be able to swap the base plate between them.
This can also be used just to convert from glass bed to magnetic plate.
For this mod you will need:
PRINTED PARTS
I designed these two pieces to correctly guide the plate using the stock fixing.
Printed on ABS with supports.
MOD
After applying the magnetic base, I used the bottom side to mark the holes and then open them on top with a scalpel.
I drilled all the holes, to have access to tighten the screws when necessary or to disassemble the base for any reason.
Mount the guides and that's it (don't forget to attach the wire to the left guide).
Thank you.
| Guide_Left.STL | 36.1KB | |
| Guide_Right.STL | 29.1KB |
