CR-10 Sd Mount 3D Printer Model

Author: @
License: CC BY-NC-SA
File formats: stl
Download type: zip
Size:117.8KB

The file 'CR-10 Sd Mount 3D Printer Model' is (stl) file type, size is 117.8KB.

Summary

I made this micro sd to sd card adapter mount in fusion 360. I made this one from scratch because I wanted one that uses the stock hardware on the CR-10, held an extra sd card and still gave access to the USB port. You do not need any extra or special hardware. The 2 bolts for you power supply are all that's needed. I made sure to leave room so the USB cable can still get connected, as well as cut an sd card slot in, and chamfer edges.

** This was the adapter I got,
https://www.amazon.com/gp/product/B06X3Y4BBB/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1

** Made a change and opened up the sd card adapter slot for a better fit.

cr10_sd_mount_new.stl 313.5KB