CR-10 Nozzle Label For Frame 3D Printer Model
The file 'CR-10 Nozzle Label For Frame 3D Printer Model' is (stl) file type, size is 346.2KB.
The file 'CR-10 Nozzle Label For Frame 3D Printer Model' is (stl) file type, size is 346.2KB.
Similar to my Makergear M2/M3 nozzle labels (https://www.thingiverse.com/thing:6455986), this is a design for my CR-10 V2. I took the idea for this from the Up/down labels that a few people have designed for the Ender 3 and CR-10 and other printers.
Labels make life easier.
There are labels for 0.2, 0.3, 0.4, 0.5, 0.6, 0.8, 1.0, and 1.2mm nozzles. The Text is big enough you cold carefully dip some contrasting paint into the text for a fancier label.
I clip the un-used labels at the back of my CR-10 V2 and only have the current nozzle size label at the front frame.
| 0.2_nozzle_label_CR10_v2.stl | 198.5KB | |
| 0.3_nozzle_label_CR10_v2.stl | 209.3KB | |
| 0.4_nozzle_label_CR10_v2.stl | 187.4KB | |
| 0.5_nozzle_label_CR10_v2.stl | 199.7KB | |
| 0.6_nozzle_label_CR10_v4.stl | 209.1KB | |
| 0.8_nozzle_label_CR10_v3.stl | 117.7KB | |
| 1.0_nozzle_label_CR10_v3.stl | 188.4KB | |
| 1.2_nozzle_label_CR10_v2.stl | 183.9KB |
