Brackets to mount CPAP WS7040 part cooling fan and controller board to 20x20 extruded aluminum or other surface. The optional cylindrical adapter part is to be printed in TPU and mates the fan outlet to 15mm CPAP hose.
Use M2 (shown in picture) or M2.5 hardware to mount the board to the bracket.
Use M3 (shown in picture) or M5 hardware to mount the brackets to the extrusion or other surface (you will need to drill out the holes if using M5).
Use M2.5 screws (preferred, shown in picture) or self-tapping screws to mount the fan to the bracket.
| WS7040_Bracket_-_ControlBoardBracket.stl | 322.0KB | |
| WS7040_Bracket_-_FanBracket.stl | 1.3MB | |
| WS7040_Bracket_-_OutletAdapter.stl | 56.3KB |
