CPAP Hose Clamp (ResMed) 3D Printer Model
The file 'CPAP Hose Clamp (ResMed) 3D Printer Model' is (stl) file type, size is 148.2KB.
The file 'CPAP Hose Clamp (ResMed) 3D Printer Model' is (stl) file type, size is 148.2KB.
A hose clamp designed primarily for the F30i CPAP mask, but will work for any ResMed mask/hose combo where this may apply. This will also likely work with any standard ~18 mm strap and ~19 mm dia hose.
No supports needed. Use the front or back of the hose clamp as the print bottom.
| CPAP_Clamp_v1.stl | 483.0KB |
