Cover For 3M Mask / Respirator Filter Cap 3D Printer Model
The file 'Cover For 3M Mask / Respirator Filter Cap 3D Printer Model' is (stl) file type, size is 102.3KB.
The file 'Cover For 3M Mask / Respirator Filter Cap 3D Printer Model' is (stl) file type, size is 102.3KB.
CAUTION: Do not cover both side when wearing the mask. The cover blocks all air intake.
Cover for 3M Mask / Respirator. Use this to cover one of the inhalation bayonet so that you could use the respirator with one filter or cartridge only.
Tested on 6200 and 6502. Should also work on 6000/6500/7500 series too.
Make sure no warping on your print so that it can be air tight.
UPDATE:
V1.5 [2020-Apr-10] Recommended
Short version(13mm). No need support and more friendly to most printers(60° overhang).
V1.3 [2020-Feb-8]
Short version(12mm). No need support if your printer can print 70° overhang.
Improved bayonet to fit most respirators.
V1 [2020-Feb-6]
Original tall version.
| 6000Cover.stl | 74.4KB | |
| 6000CoverV1.3.stl | 128.7KB | |
| 6000CoverV1.5.stl | 155.3KB |
