Cosmos Corps Built-Your-Own Rocket – ROCKET ACCESSORIES! 3D Printer Model
The file 'Cosmos Corps Built-Your-Own Rocket – ROCKET ACCESSORIES! 3D Printer Model' is (stl) file type, size is 46.3MB.
The file 'Cosmos Corps Built-Your-Own Rocket – ROCKET ACCESSORIES! 3D Printer Model' is (stl) file type, size is 46.3MB.
Presenting an assortment of ACCESSORIES! for my Cosmos Corps modular, fully customizable, 50's, retro-sci-fi, build-a-rocket system:
BASIC ROCKET: https://www.thingiverse.com/thing:6677179
FUSELAGES: https://www.thingiverse.com/thing:6696445
NOSE CONES: https://www.thingiverse.com/thing:6691622
FINS: https://www.thingiverse.com/thing:6702154
EXHAUSTS: https://www.thingiverse.com/thing:6708063
BOOSTERS: https://www.thingiverse.com/thing:6719339
BOOSTER FINS: https://www.thingiverse.com/thing:6724810
Btw, the rocket pods require a ballpoint pen spring - and be careful where you fire them!
Stay tuned for some ADDITIONAL ROCKET PARTS followed by a bunch of (roughly 1:220, Z scale) vehicles, spaceport structures, alien outposts, space station sections, otherworldly landscapes, and extraterrestrial beasties!
| Hanging_Rails.stl | 83.5KB | |
| Hatch_Rail.stl | 1.0MB | |
| Ladder_Rail_1.stl | 1.9MB | |
| Ladder_Rail_2.stl | 13.6MB | |
| Landing_Gear_Rail.stl | 5.5MB | |
| Landing_Pads.stl | 7.5MB | |
| Landing_Skid.stl | 3.3MB | |
| Misslepod.stl | 1.6MB | |
| Short_Fuel_Tank_Rail.stl | 539.9KB | |
| Short_Hatch_Rail.stl | 2.0MB | |
| Short_Nozzle_Rail.stl | 2.3MB | |
| Short_Snap_Connector_Rail.stl | 1.9MB | |
| Sliding_Snap_On_Rail.stl | 2.9MB | |
| Snap_Accessory_1.stl | 974.0KB | |
| Snap_Accessory_2.stl | 1.5MB | |
| Snap_Accessory_3.stl | 3.5MB | |
| Snap_Accessory_4.stl | 11.2MB | |
| Snap_Accessory_5.stl | 2.7MB | |
| Snap_Accessory_6.stl | 40.9MB | |
| Snap_Connector_Rail.stl | 1.9MB | |
| Toothed_Rail.stl | 631.4KB | |
| Window_Rail.stl | 902.7KB |
