Corsair 220T Front Panel Filter Honeycomb Mesh 3D Printer Model Free Download

3D Printer Models

Corsair 220T Front Panel Filter Honeycomb Mesh 3D Printer Model

Author: @TheSlashEffect

License: CC BY

File formats: stl

Download type: zip

Size:1.8KB

The file 'Corsair 220T Front Panel Filter Honeycomb Mesh 3D Printer Model' is (stl) file type, size is 1.8KB.

Description Files (3)

Summary

I always wanted a honeycomb pattern on my front panel, but by the time I got a new case I couldn't find any models with one. Then I got a 3D printer. Instructions:

Set top & bottom layers to 0
Set a decent number of walls (3 was fine in my case)
Choose an infill pattern you like. My photos show the honeycomb (custom Cura, see below) and cross patterns
Set infill line multiplier (Cura) to >= 2. I used 3
Lower infill speed to your usual wall speed if your printer can't go that fast
Clean yer print surface

You need to print 3 parts. Top and bottom stl's are identical. Remove your case glass and filter. Use a bit of hot glue to secure to the inside part of the filter. Printing is fast and the assembly process takes 10 minutes tops.

If you want the honeycomb infill on Cura, you have to use a custom Cura release by smartavionics found on GitHub. A thanks to the uploader.

If anyone wants the measurements so they can make their own designs, feel free to message me.

The specific case in question is the Corsair 220T RGB.

220T_Front_grill_bottom_part.stl	684.0B
220T_Front_grill_middle_part.stl	6.5KB
220T_Front_grill_top_part.stl	684.0B

Corsair 220T Front Panel Filter Honeycomb Mesh 3D Printer Model

Summary

Tags

You might also like