Corona Face Mask 3D Printer Model
The file 'Corona Face Mask 3D Printer Model' is (stl,STL) file type, size is 2.6MB.
The file 'Corona Face Mask 3D Printer Model' is (stl,STL) file type, size is 2.6MB.
There is a Free Corona Face Mask be healthy with it its totally free please share it to your'e 3D friends thanks
Printing the Files
• We suggest PLA material
• Takes 3 hours and varies printer to printer
• Designed to be printed without supports
• Print an array if possible, source file is included if one would like to modify
• Designed for Adult Large, scale to 90% or less for smaller masks
Making the Mask
• Sand around the edge touching face with 200 + sandpaper
• Fasten elastic cord to the attachments and adjust to desired tension
• Elastic chord, string, straps, or any variation can be used as ties
Placing Filter
• Existing clinical masks can be used as a filter by cutting them into 2.5 in squares, can get 6 filters from one mask
• Place filter material on the inside of the mask and fasten by pushing holding ring and filter together into space
Aseptic Technique
• These masks are reusable, but each person should have their own
• Masks can be cleaned and disinfected by soap and water as well as disinfectant agents
• Practice good hygiene by washing hands before and after changing filters and removing mask
• Clean mask often, change filter often
| CoronaMask.stl | 4.9MB | |
| CoronaMaskFilter.stl | 508.9KB | |
| CoronaMaskFilterFrameWithFlange.stl | 475.7KB | |
| CoronaMask_mold_bottom_v1.STL | 302.0KB | |
| CoronaMask_mold_top_v1.STL | 337.4KB |
