This is a rail to hold 10mm wide LED strips.
This is meant to be PRINTED VERTICALLY IN VASE MODE. Just add a brim to keep it in place, no need for supports.
You can scale the length to your needs and if a print fails halfways you can easily cut the bad parts and have a usable segment.
It's designed to mount the LED strip on a corner, keeping it as close as posible to it and at a 45 degrees angle, so it doesn't get in the way.
The corner has a 5mm radius because that's what I needed to keep it flush with the surface I was going to glue it, but there is a FreeCad file included if you want to modify it.
Vase mode works great, the part has some flexibility and there is a space inside that could fit a hidden cable, or some reinforcement.
| LED_strip_10mm_45deg_5mm_r_x_10cm.stl | 75.3KB | |
| LED_strip_10mm_45deg_5mm_r_x_25cm.stl | 75.3KB | |
| LED_strip_5050_10mm.FCStd | 37.8KB |
