Corner Clamps For Harbor Freight Quick Release Clamp 3D Printer Model
The file 'Corner Clamps For Harbor Freight Quick Release Clamp 3D Printer Model' is (stl) file type, size is 371.9KB.
The file 'Corner Clamps For Harbor Freight Quick Release Clamp 3D Printer Model' is (stl) file type, size is 371.9KB.
Slide on Corner Clamp Pads for the Harbor Freight Quick Release Clamps. I am working on the differences between the 9xxxx series clamps and the 6xxxx series clamps, as both have different dimensions (Which is why I would do one and it worked great then do another one and struggled) Soon to be versions for each type.
The 6xxxx series clamp has a shiny finish, larger notches, it also slips easier and can't tighten as well.
The 9xxxx series clamp has a dull finish, smaller notches, it clamps better without slipping, it is hard to find but is the more reliable clamp.
45G inner Corner Clamp-Revised 9/23/2017 to add fillet
45F Small Outer Corner Clamp
45H Large Outer Corner Clamp
9/21/2017: Added 45I, which is 45H with some drill template holes
9/23/2017: Added 45J, an experiment to make it easier to screw/nail.
9/23/2017: Changed all models to reduce the chance of a stress fracture when inserting onto clamp
9/27/2017: Added part number suffix codes to the stl files (Many have not been tested)
Require a little force to put on the first few times.
| 45F-6xxxx.stl | 56.2KB | |
| 45F-9xxxx.stl | 54.5KB | |
| 45G-6xxxx.stl | 103.4KB | |
| 45G-9xxxx.stl | 311.1KB | |
| 45H-6xxxx.stl | 50.8KB | |
| 45H-9xxxx.stl | 49.4KB | |
| 45I-6xxxx.stl | 364.0KB | |
| 45I-9xxxx.stl | 362.7KB | |
| 45J-6xxxx.stl | 53.2KB | |
| 45J-9xxxx.stl | 51.0KB |
