Corner Bracket – 50 X 50 X 50mm 3D Printer Model
The file 'Corner Bracket – 50 X 50 X 50mm 3D Printer Model' is (stl) file type, size is 16.0KB.
The file 'Corner Bracket – 50 X 50 X 50mm 3D Printer Model' is (stl) file type, size is 16.0KB.
Nothing terribly special, here. This is a 3-way corner bracket, 50mm x 50mm x 50mm (about 2 inches in each direction), with three hole positions on each of 3 sides such that there's lots of opportunities to find some meat on the boards you're framing.
I'd make it as robust as possible, wall thicknesses, thick top and bottom layers. I cut the very corner on a diagonal so it can be printed ON that corner for greatest strength of bias.
Hope this helps people! I can get 6 of these brackets on a single 220x220mm bed.
| Corner_Bracket_-_50x50x50_-_001.stl | 79.6KB |
