Corne Keyboard (crkbd) Tenting Feet 3D Printer Model
The file 'Corne Keyboard (crkbd) Tenting Feet 3D Printer Model' is (3mf,stl) file type, size is 654.2KB.
The file 'Corne Keyboard (crkbd) Tenting Feet 3D Printer Model' is (3mf,stl) file type, size is 654.2KB.
Tenting feet for my Corne LP keyboard, With accompanying locking nuts,
The feet are intended to be glued to the head of an M5 pan-head bolt, and are intended to be threaded into a heat-set brass insert on the keyboard. The feet are also intended to seat 6x2mm sticky backed feet on the bottom.
The lock nuts are intended to be compatible with 6x8mm brass threaded inserts, but any 6mm insert should work.
The 3mf files have been included if you need to size anything down / up for your printer, or if you just want to remix :)
| Tenting_foot.3mf | 62.1KB | |
| Tenting_foot.stl | 215.2KB | |
| Tenting_foot_lock_insert_version.3mf | 113.5KB | |
| Tenting_foot_lock_insert_version.stl | 347.8KB | |
| Tenting_foot_lock_raw_thread_version.3mf | 120.5KB | |
| Tenting_foot_lock_raw_thread_version.stl | 369.8KB |
