Printable parts for the CoreXY Frame based on the concept from FABtotum (without crossing belts).
!!! Prototype. Not tested.
CAD: https://grabcad.com/library/corexy-frame-v-1-0-1
v.2.0: http://www.thingiverse.com/thing:2138286
Extruder parts (prototype, not tested): http://www.thingiverse.com/thing:1850392
20x20 aluminium profile 6mm slot
MGN linear rail 1 pcs. (MGN9 or MGN12)
Ø10 mm linear rod 2 pcs.
GT2 6mm belt
(length depends of the desired work area - calculations on the picture)
GT2 pulley 20 teeth 2 pcs.
LM10LUU linear bearing 2 pcs.
SK10 support block 4 pcs.
F694ZZ ball bearing 16 pcs.
2020 internal L-joint 4 pcs.
| belt_clamp.STL | 113.1KB | |
| nema17_mount_L.STL | 117.1KB | |
| nema17_mount_R.STL | 117.1KB | |
| x_axis_part_L.STL | 162.4KB | |
| x_axis_part_R.STL | 162.4KB | |
| x_idle_pulley_L.STL | 225.0KB | |
| x_idle_pulley_R.STL | 225.1KB | |
| y_idle_pulley_mount_L.STL | 89.8KB | |
| y_idle_pulley_mount_R.STL | 89.8KB |
