This requires screws 12mm length 4.8 width of thread ( alternatively you can use glue)
Bulb & Cable is standard European E25.
But need to strip the outer layer of the cable the white part when feeding through the print
Use a piece of string and tie it to the end of the wires to feed it through the printed parts
Printed in Silk Copper PLA
0.3MM
on Pursa Mk3S
| Pyramid_lamp_2nd_level_v1.stl | 122.3KB | |
| Pyramid_lamp_3rd_level_v1.stl | 234.6KB | |
| Pyramid_lamp_base_v1.stl | 34.9KB | |
| Pyramid_lamp_cap_v1.stl | 188.2KB | |
| Pyramid_lamp_shade_v1.stl | 320.1KB | |
| Pyramid_lamp_Top_level_v1.stl | 376.3KB |
