When I attached the original I split the clip.
I was using stainless steel screws that had flat head bottoms. I think they are called oval head.
The original clip was designed for V shape drywall screws, Counter sunk screw heads.
So, my flat head screws went down the V and split it open.
I didn't want to worry about rust from the drywall screws staining the wood post, it is outdoors on my deck, so I wanted the stainless screws rather than the drywall screws.
I thickened the bottom of the clip and flattened out the bottom of the screw hole, otherwise it is the same clip for the wand.
100% PETG
| crank_clip_B.stl | 245.4KB |
