Cookietracker – Slime VR Tracker Case – TheButhla Breakout_Slime 3D Printer Model
The file 'Cookietracker – Slime VR Tracker Case – TheButhla Breakout_Slime 3D Printer Model' is (stl,step) file type, size is 5.0MB.
The file 'Cookietracker – Slime VR Tracker Case – TheButhla Breakout_Slime 3D Printer Model' is (stl,step) file type, size is 5.0MB.
I've designed a compact case and a EX. case for the BNO085, for the breakout board by TheButlah. The case fits the PCB with components, along with a 10mm thick 33x51mm battery. The maximum battery size that fits the case is 35x54mm, with 1-2mm clearance at the top. If your battery is thinner, you can compensate for the difference using the "battery extender". Simply adjust the Z-height in your slicer accordingly. The default height of the extender is set to 8mm.
Otherwise, feel free to edit the case to your needs. All models are included as a step file.
Lip EX and Lip "normal"
There are two lip versions: the EX has a cutout for the JST Port in case you want to use an extension, while the normal one does not.
Power Switch:
please note (!) The case is designed to work with the smaller RUNCCI-YUN 12D00G. SS22F32 will not fit. They can be found here:
https://www.amazon.de/dp/B09TVFF6KW?ref=ppx_yo2ov_dt_b_fed_asin_title
Mounting:
I use both Velcro and a strap (see example image) for securing the trackers.
Recommendation:
The case is designed to be opened and closed. Please note that you need to flash the tracker beforehand, as I did not include a cutout for the Wemos D1 micro USB port.
I also recommend gluing the lid with superglue once you permanently close the tracker (it's still a 3D print, so repeated opening and closing will fatigue the material).
I recommend placing some foam or cotton between the PCB and the lip to ensure everything is held securely in place.
PCB:
The PCB can be found here: https://github.com/TheButlah/slimevr_pcb/tree/main/hardware/breakout_slime
Use PCB Way / JLCPCB for creating the boards. A component list can also be found on GitHub.
BNO085:
I recommend buying the BNO085 directly from SlimeVR (the cheapest option):
https://shop.slimevr.dev/products/slimevr-imu-module-bno085
3D Print:
Only the cutout for the strap need support. i use 20% infill and a layerhigh of .2 mm.
| Batterie-Extender.stl | 684.0B | |
| cookietracker_case_v1.step | 339.0KB | |
| cookietracker_ex_v4.step | 1.2MB | |
| cookietracker_ex__normal_v3.step | 1.2MB | |
| cookietracker_lip_Extantion.step | 1.2MB | |
| cookietracker_lip_normal_v1.step | 1.2MB | |
| cookie_extation.step | 294.6KB | |
| EX_case.stl | 72.9KB | |
| EX_case_blank.stl | 119.9KB | |
| EX_case_no_label.stl | 387.9KB | |
| EX_Lip_Chest.stl | 737.1KB | |
| EX_Lip_Hip.stl | 405.1KB | |
| EX_Lip_L_Food.stl | 468.7KB | |
| EX_Lip_R_Food.stl | 480.8KB | |
| EX_Lip_Waist.stl | 462.3KB | |
| lip_Chest.stl | 728.4KB | |
| lip_extantion_no_label.stl | 631.8KB | |
| lip_Hip.stl | 655.1KB | |
| lip_L_Ankle.stl | 685.3KB | |
| lip_L_FoodNo_EX.stl | 708.6KB | |
| lip_L_low_Arm.stl | 700.2KB | |
| lip_L_Thigh.stl | 702.3KB | |
| lip_L_up_Arm.stl | 703.7KB | |
| lip_no_label.stl | 636.7KB | |
| lip_R_Ankle.stl | 683.4KB | |
| lip_R_FoodNo_EX.stl | 720.7KB | |
| lip_R_low_Arm.stl | 712.3KB | |
| lip_R_Thigh.stl | 714.4KB | |
| lip_R_up_Arm.stl | 715.8KB | |
| lip_Waist.stl | 712.6KB | |
| Tracker_Case.stl | 119.9KB |
