This is a set of 9 donut cutters to use with polymer clay.
Sized from 2cm to 6cm they have a 0.87mm wall with a small 0.25mm cutting edge for a sharper cut.
Dimensions were optimized to be printed with a 0.25 nozzle and 0.20 layer height.
| donut-2.5.stl | 122.4KB | |
| donut-2.stl | 272.6KB | |
| donut-3.5.stl | 120.0KB | |
| donut-3.stl | 119.0KB | |
| donut-4.5.stl | 122.6KB | |
| donut-4.stl | 121.9KB | |
| donut-5.5.stl | 124.0KB | |
| donut-5.stl | 123.5KB | |
| donut-6.stl | 125.3KB |
