This is a box to contain all the main control electronics for a 3D printer which uses a Ardiuno Mega 2560, Ramps 1,4 and with the full graphic display. It can also contain a Raspberry Pi 3 for use with AstroPrint. It has active cooling and three push out covers in the back for cable management.
Parts List:
1x Ardiuno Mega 2560
1x Ramps 1.4 Controller shield
1x Raspberry Pi 3 (Opt)
1x 40x40mm 12v Fan (Distance between mounting points)
2x M8x15mm bolts
2x M8 nylock nuts
10x M3x10mm screws
5x 4mm attaching points (Depending on how you will attach it to your printer)
Hot glue gun with glue
| Controller_Base.stl | 1.9MB | |
| Controller_Top.stl | 1.1MB | |
| knurled_knob.stl | 533.5KB | |
| Raspberry_Pi_3_Mount.stl | 1.3MB | |
| stop_button.stl | 335.7KB |
