Very easy print: just print parts a(13g and 57 minutes) and b (7g and 30 minutes).
Use the Cura settings:
Resolution: 0.2 mm
Infill: any
Support: no
Wall Ordering: Outside To Inside
| container_d60h100_a.stl | 172.3KB | |
| container_d60h120_a.stl | 176.9KB | |
| container_d60h160_a.stl | 169.0KB | |
| container_d60h200_a.stl | 177.2KB | |
| container_d60h20_a.stl | 156.3KB | |
| container_d60h30_a.stl | 156.0KB | |
| container_d60h40_a.stl | 155.0KB | |
| container_d60h50_a.stl | 162.8KB | |
| container_d60h60_a.stl | 171.0KB | |
| container_d60h80_a.stl | 167.5KB | |
| container_v3_b.stl | 146.7KB | |
| container_v4_b.stl | 165.3KB | |
| container_v5.f3d | 1.2MB | |
| container_v5_b.stl | 558.1KB | |
| PrintThread45.xml | 8.7KB |
