This is a set of printer housing accessories.

I created this to get rid of the printing fumes.
Got useful especially after fitting a laser diode for engraving to my Anet A8.
It is designed to go onto an existing printer housing, mine was made out of polycarbonate.
All you need is four small holes for the screw and a 30mm hole for the air.
The air hole is kept small so you can use a standard 32mm step drill, as the output port of the fan is aprox. the same area.

I hope the parts are self descriptive, otherwise send me a note ;)

Contains:
-> 1x adapter for a 75mm radial fan (created for Titan TFD-B7530M12C)
-> 1x outer plate for housing, fits a dryer air exhaust hose (100mm)
-> 1x an adapter for the other hose end, suitable for small window gaps (hangs on a tilted window)
-> 1x an adapter for the other hose end, suitable for larger window gaps (hangs on a tilted window, provides better air flow)
-> 1x an adapter for the other hose end, suitable for larger window gaps (hangs on a tilted window, pushes air out downwards)
-> 1x customizeable counter plate for fitting own fan sizes to the set

Most of the files should be printeable without raft or support and 0.1mm layer thickness,
the fan adapter needs supports but no raft.
All parts are designed to be printed with the flat faces of the plate facing down, with the window hangers the top has to be facing down.

Depending on your print quality you might get small overhangs between the inner supporting walls, which i removed as far as i could with some needle nose pliers.

REMINDER:
Printing the window hangers with support will most definitely render your print useless, as you will not get the support material out! That's why i put those walls in...

Happy tinkering!