Connect Four / Vier Gewinnt 3D Printer Model
The file 'Connect Four / Vier Gewinnt 3D Printer Model' is (stl) file type, size is 1.6MB.
The file 'Connect Four / Vier Gewinnt 3D Printer Model' is (stl) file type, size is 1.6MB.
Coins included.
The game includes a board, two different coin styles, two caps and a font logo. The two caps are used to make the game portable and ensure that no coins are lost during transport. The two caps are also used to give a stable stand while playing (see picture).
There are two coin styles included (style A and B). Use whatever fits your taste. You'll need at least 21 coins per player. Use the "x25" files to print 25 coins at once. I also included .stl files with single coins in case you lost one and need to print a single coin only.
Printing the included font logo is optional. It's not mandatory but gives a decent look to your game. Use some glue to stick the logo on the board.
Can be printed in various sizes:
100% - 'Indoor' size (appropriate for kids and seniors)
75% - Portable size (for outdoor and travelling)
Printing:
Print all files in the orientation as provided in the .stl files.
No supports are needed, but make sure your heatbed has a good adhesion. Use a brim for best adhesion.
All files can be printed with a layer height of 0.3mm (less printing time). But you may also use 0.2mm of course.
| Connect_Four_Board.stl | 593.9KB | |
| Connect_Four_Caps.stl | 63.3KB | |
| Connect_Four_Coin_A_x1.stl | 226.6KB | |
| Connect_Four_Coin_A_x25.stl | 5.5MB | |
| Connect_Four_Coin_B_x1.stl | 75.1KB | |
| Connect_Four_Coin_B_x25.stl | 1.8MB | |
| Connect_Four_Logo.stl | 345.4KB |
