Conduit Furniture 3D Printer Model
The file 'Conduit Furniture 3D Printer Model' is (stl) file type, size is 150.8KB.
The file 'Conduit Furniture 3D Printer Model' is (stl) file type, size is 150.8KB.
This is my attempt at making a cheap, fast, strong, and modular system to use 1/2" EMT conduit to make furniture. Think of this as a replacement for cinder block and plywood dorm room furniture. I made this so that you can mix and match parts to make any design you want. My first project was a 4 shelf 5 foot high 2 foot wide 16 inch deep bookcase. I loaded 100lbs on the top shelf with no movement at all.
Watch the YouTube video for the full build and helpful hints.
Do not over tighten! It will hold fine without torqueing too hard.
Print coupling pieces with high infill for strength (I did 99%)
Print all other parts at 20% infill or so.
| 5_EMT_All_Thread.stl | 66.3KB | |
| 5_EMT_Cap.stl | 62.8KB | |
| 5_EMT_Coupling.stl | 106.3KB | |
| 5_EMT_Cross.stl | 95.8KB | |
| 5_EMT_Foot.stl | 53.1KB | |
| 5_EMT_Tee.stl | 79.3KB | |
| 5_EMT_Turnbuckle.stl | 23.1KB |
