Concrete Lamp 3D Printer Model
The file 'Concrete Lamp 3D Printer Model' is (stl) file type, size is 447.7KB.
The file 'Concrete Lamp 3D Printer Model' is (stl) file type, size is 447.7KB.
https://www.instructables.com/id/Exclusive-Concrete-Lamp/
IMPORTANT: For the inner molds "E27 Mold" and "buttonmold" make sure that you DONT print them with more than 5% infill, and DONT use more than one perimeter as in the picture above. The reason is that it should be easy to break the inner mold after the concrete has cured.
Things you need:
Tools:
diamond polishpads i have one of each grit (from 60 to 3000) - https://goo.gl/ZFUH5X
Solder iron - https://goo.gl/tlXt6G
Gluegun - https://goo.gl/tqisEb
3D-printer - https://goo.gl/Jnw09F
Trowel - https://goo.gl/TxQIAg
Bill of material:
Lampsocket E27 - https://goo.gl/fIljMu
E27 bulb Edison - https://goo.gl/cwibj9
Textile cord - https://goo.gl/sezM0x
Cable gland - https://goo.gl/pZwdqm
Lampswitch - https://goo.gl/bzNuj5
Shrinkingtube - https://goo.gl/xiJfpD
Wallplug retro UK - https://goo.gl/bTd0G1
Wallplug 220V EU -
Sealer for concrete - https://goo.gl/3gKPts
Videoinstrucations:
This a project i payed 100´s of hours, thank you please support me and my work by like and subscribe to my youtubechannel:
If you like what I do consider leaving a small tip to support me for more designs, thank you :)
| bottom.stl | 108.3KB | |
| buttonmold.stl | 400.6KB | |
| E27_Mold.stl | 468.1KB | |
| parta.stl | 177.5KB | |
| partb.stl | 234.9KB | |
| plug1.stl | 162.2KB | |
| plug2.stl | 41.5KB |
