Concrete Lamp 3D Printer Model
The file 'Concrete Lamp 3D Printer Model' is (stl) file type, size is 997.8KB.
The file 'Concrete Lamp 3D Printer Model' is (stl) file type, size is 997.8KB.
This is a mold to create a concrete lamp base for a IKEA glass vase.
All credits for the design go to Glen at DIY Creators https://www.youtube.com/watch?v=Kb9vXZfTYoA&t=0s&index=33&list=WL.
If you follow the link you will find the original instructions on how to create the lamp base ... Like casting the concrete etc.
Since I have a 3D-printer I decided to make a more high-tech version of the mold ;-)
The base part is printed with support - but the other two parts should be possible to print without any support.
When all three parts have been printed they are assembled (see attached image) and I used duct tape to make sure that they stayed together when I poured the concrete in.
Unfortunately the mold can only be used once as its impossible to remove it from the concrete without breaking it. I used a lighter to heat up the plastic after the casting process had completed which makes it easy to remove.
The mold fits the IKEA 602.233.28 vase snugly
Parts list:
| Mold_CenterHole.stl | 153.3KB | |
| Mold_centerhole_-Reusable.stl | 146.9KB | |
| Mold_Main.stl | 2.1MB | |
| Mold_main_-Reusable.stl | 429.1KB | |
| Mold_Toppart.stl | 282.9KB | |
| Mold_toppart_-Reusable.stl | 169.5KB |
