Computer Keyboard Stand, Logitech K120, Generic, Combined Rear Feet 3D Printer Model
The file 'Computer Keyboard Stand, Logitech K120, Generic, Combined Rear Feet 3D Printer Model' is (stl) file type, size is 472.0B.
The file 'Computer Keyboard Stand, Logitech K120, Generic, Combined Rear Feet 3D Printer Model' is (stl) file type, size is 472.0B.
A pair of stands for my Logitech K120 keyboard that allow it to be stood vertically on its rear edge to free up desk space.
They are permanently mounted inboard of the folding rear feet, so these can still be used if desired. The stands double up as rear feet and raise the rear of the keyboard by around 10mm.
They are a snug fit, but I added pads of double sided tape (see photo) to prevent them slipping off. I also added a 7mm stick on silicon dot (the type fitted to cupboard doors) beneath each stand to keep the keyboard from sliding when in use.
The default width is 17.5mm. I found wider was better, so I rescaled the Z axis to 30mm in Cura slicer.
The keyboard cutout is 17.6mm tall. It can easily be rescaled to fit other keyboards or devices requiring a stand.
| KBstand.stl | 1.8KB |
