Compressor_2.0 3D Printer Model
The file 'Compressor_2.0 3D Printer Model' is (3mf,stl) file type, size is 13.5MB.
The file 'Compressor_2.0 3D Printer Model' is (3mf,stl) file type, size is 13.5MB.
A larger piston type compressor , with a higher working pressure and volume compared to both the previous piston pump and the diaphragm pump. with the oring type piston I managed about 6-7psi and with the piston ring managed 3-4psi .
parts required
m4 fasteners to suit ( i have yet to count and measure everything used )
8mm shafting or tubing .
abs tubeing 1 1/2 inch id ( can be printed) 60mm long
608 bearings / nylon bushing ( stls provided)
o'ring 3mm cross section for standard abs tubing id ( hoping this is fairly standard world wide .)
6mm shafting / tube for wrist pin.
m6 mounting hardware and rubber anti vibe pucks/ orings ( for quiet operation)
video : https://youtu.be/hBEwEWXKngk
| 1_8_npt_port_head.3mf | 3.1MB | |
| 1_8_npt_port_head.stl | 5.8MB | |
| 608_brank_case_bottom.3mf | 973.4KB | |
| 608_brank_case_bottom.stl | 1.9MB | |
| 608_crank_case_top.3mf | 1.1MB | |
| 608_crank_case_top.stl | 2.3MB | |
| abs_glue_on_flange.3mf | 43.8KB | |
| abs_glue_on_flange.stl | 112.8KB | |
| abs_glue_on_head_cap.3mf | 1.0MB | |
| abs_glue_on_head_cap.stl | 2.0MB | |
| connecting_rod.3mf | 47.4KB | |
| connecting_rod.stl | 103.0KB | |
| crank_shaft_lobe2required.3mf | 47.6KB | |
| crank_shaft_lobe2required.stl | 576.9KB | |
| diaphram_valves.3mf | 47.9KB | |
| diaphram_valves.stl | 662.6KB | |
| larger_dia_motor_pully.3mf | 523.6KB | |
| larger_dia_motor_pully.stl | 5.7MB | |
| large_oring_pully.3mf | 824.8KB | |
| large_oring_pully.stl | 8.6MB | |
| medium_motor_Pully.3mf | 611.5KB | |
| medium_motor_Pully.stl | 1.3MB | |
| my6812_motor_mount.3mf | 164.8KB | |
| my6812_motor_mount.stl | 392.3KB | |
| nylon_608_replacement_with_thrust_sholder.3mf | 36.1KB | |
| nylon_608_replacement_with_thrust_sholder.stl | 98.9KB | |
| One_piece_printed_cylinder.3mf | 1.2MB | |
| One_piece_printed_cylinder.stl | 2.3MB | |
| oring_piston.3mf | 73.7KB | |
| other_large_8mm_id_pully.3mf | 716.3KB | |
| piston_ring.3mf | 47.3KB | |
| piston_ring.stl | 100.8KB | |
| piston_ring_piston.3mf | 74.1KB | |
| piston_ring_piston.stl | 210.6KB | |
| small_motor_pully.3mf | 529.7KB | |
| small_motor_pully.stl | 1.1MB |
![3D Printable Pallet Town [ Pokemon! ] 3D Printer Model](https://cdn.3axis.co/assets/45/ee/aa/1c/45eeaa1c-18b3-46e5-8ceb-26b23a7521c7/images/21cf5b03-7f07-4037-ae00-fd726bccba7d_thumb.jpg)