Compressed Air Engine V2 – Rotary Valve Piston Engine 3D Printer Model
The file 'Compressed Air Engine V2 – Rotary Valve Piston Engine 3D Printer Model' is (stl) file type, size is 969.2KB.
The file 'Compressed Air Engine V2 – Rotary Valve Piston Engine 3D Printer Model' is (stl) file type, size is 969.2KB.
This is version 2 of my 3D printed air engine. This engine uses a rotary valve and requires a small nail for the piston and two 608 bearings. Assembly is straight forward but requires a bit of drilling and sanding to reach the tolerances. Engine runs with lung pressure and is designed to fit a G1/8 connector at the inlet.
This engine is part of a project I did for university.
The tolerances used are tight so drilling and sanding may be required in some places.
| bushing.stl | 538.5KB | |
| connectingrod.stl | 60.4KB | |
| crankshaft1.stl | 248.2KB | |
| crankshaft2.stl | 202.8KB | |
| crankshaft3.stl | 96.8KB | |
| Flywheel.stl | 189.9KB | |
| housing.stl | 1.5MB | |
| piston.stl | 311.2KB |
