Compliant Side Clamp With Only One Screw 3D Printer Model
The file 'Compliant Side Clamp With Only One Screw 3D Printer Model' is (stl) file type, size is 101.5KB.
The file 'Compliant Side Clamp With Only One Screw 3D Printer Model' is (stl) file type, size is 101.5KB.
After many iterations and different design aproaches i finally found a working one Screw side Clamp mechanism. It clamps and pulls the workpiece down.
Slide it to the workpiece, hold it against it and tighten the screw about 0,5-0,75 turns when you feel the screw interacts.
The clamping surface 1° tilted.
Distance to table 5/15mm.
Printing Instruction:
Print in PLA, 100% Infill. "Clamp" on side and the "fixed side" on the base.
1x M6 Countersunk bolt per part.
There are 2 Versions: In one of them the screw is tilted a little bit to optimize the clamping the force. For this one the t-nut has to be able to be tilted like that. If it has not enough play print the "straight" ones.
"low" Version=Zero gap to the table
Please leave your Feedback/Makes
| Clamp.stl | 75.9KB | |
| Clamp_low.stl | 75.9KB | |
| clamp_low_screw_straight.stl | 34.1KB | |
| clamp_screw_straight.stl | 34.1KB | |
| Fixed_side.stl | 39.6KB | |
| fixed_side_low.stl | 43.0KB |
