If you could support my YouTube channel that would be awesome :)!
https://bit.ly/SubscribeToPattysLab
Thank you, danke, grazie, gracias, merci, xie xie, kamsahamnida, takk, spasiba, shukran :)
This means a lot to me!
You need:
1x Handle
2x Special washers
2x Countersink m3x10mm screws
1x body (short of full)
superglue
pliers
tweezers
utility blade
optional sandpaper (to smoothen the ring sections)
Extra you can print the calibration file to see if your settings are correct
or watch the first couple of layers as I explain in my video!
Please watch the entire video before you ask your questions :)
(and you would help me out with the watch time)
| Base_Full_Bin.STL | 896.8KB | |
| Base_Short_Bin.STL | 877.4KB | |
| Handle.STL | 384.8KB | |
| Handle_Washer.STL | 197.0KB | |
| Modular_Trashbin_Full.STL | 4.6MB | |
| Modular_Trashbin_Printer_Calibration_Test.STL | 1.6MB | |
| Modular_Trashbin_Short.STL | 3.5MB |
