Compact differential that's supposed to be driven by a GT2 timing belt.
Its compact size allows for installation in even small projects.
GT2 tooth count: 44.
Measurements: 69mm x 38mm x 38mm.
Designed with common sized bearings.
To build it, you'll need:
4x Bearing:
2x Bearing:
Printed parts:
1x diff_gt2_cage.stI
2x diff_pinion_gear.stl
2x diff_side_gear.stl
1x diff_casing_full.stl
1x diff_casing_empty.stl
1x diff_pinion_shaft.stl
2x hex_shaft.stl
2x spacer_small.stl
2x spacer_big.stl
| diff_casing_empty.stl | 105.9KB | |
| diff_casing_full.stl | 104.7KB | |
| diff_gt2_cage.stl | 1008.7KB | |
| diff_pinion_gear.stl | 507.0KB | |
| diff_pinion_shaft.stl | 6.1KB | |
| diff_side_gear.stl | 310.4KB | |
| hex_shaft.stl | 884.0B | |
| spacer_big.stl | 76.1KB | |
| spacer_small.stl | 26.1KB |
