This is a printable model of the Combine turret from Half Life 2.
I used the original model as a reference, but this model was made from scratch in Blender.
Designed with ease-of-printing in mind, there is one flat surface on every part, so that you don't have to use shitloads of support or a raft. The parts are already rotated to the best printing position.
Instructions:
The gun can swivel up and down if you don't glue it, the body and legs are meant to be glued.
The 4 holes on the gun are there to insert some small pieces of wire to match the look of the original, as there were wires coming out the back in a loop.
The combine turret design, that i used as a reference for this, as well as the HL2 logo i used in the preview image belong to Valve.
| halflife_turret_3d_preview_NOT_PRINTABLE.stl | 139.2KB | |
| halflife_turret_all_on_buildplate.stl | 721.7KB | |
| halflife_turret_body_fixed.stl | 23.4KB | |
| halflife_turret_gun.stl | 453.1KB | |
| halflife_turret_leg_back.stl | 65.7KB | |
| halflife_turret_leg_front.stl | 86.3KB |
