(A) Color mix hotend:
混色热端
https://item.taobao.com/item.htm?spm=a1z3i.7c.footer.4&id=531968680133
Three in and one out hotend.
三进一出热端
3D printer hot end all-metal [North Five]
全金属热端【北五科技】
see: http://www.thingiverse.com/thing:1577565
QQ: 26022470
E-mail: [email protected] or [email protected]
(B) Firmware and software tool:
固件和软件工具
http://www.instructables.com/files/orig/F9B/2CM8/IOVPN0PA/F9B2CM8IOVPN0PA.rar
or
https://github.com/luc-github/Repetier-Firmware-0.92
Config the firmware to support three extruder.
This firmware have M163 and M164 command, this commands mix color material.
How to add the "M163" and "M164" command automaticly, use a attch file colormix.py.
usage: python.exe mixgcode.py input.gcode output.gcode
Auther: WangJinLong 王金龙
Data: 2016-07-08
MIX_COLOR_GUIDE in colormix.py file control the changing color. Every item is marked one color. Between two colors, after the compute, py file insert some color value automaticly.
If you have any question, please email to me.
QQ: 26022470
E-mail: [email protected] or [email protected]
Reference:
http://www.instructables.com/id/RGB-STEEL-Low-Cost-Steel-Frame-Color-3D-Printer/?ALLSTEPS
http://reprap.org/wiki/Repetier_Color_Mixing
| colormix.cmd | 407.0B | |
| colormix.py | 8.6KB | |
| ColorMixHotEnd_Chinese.pdf | 254.6KB | |
| TMTCTW-huaping.gcode | 50.9KB | |
| TMTCTW-huaping.stl | 30.6KB |
