Colonial Viper Mk1 – Original BSG 3D Printer Model
The file 'Colonial Viper Mk1 – Original BSG 3D Printer Model' is (stl) file type, size is 119.3MB.
The file 'Colonial Viper Mk1 – Original BSG 3D Printer Model' is (stl) file type, size is 119.3MB.
Colonial Viper Mk1 - OBSG
Easy to figure out. This was made in Fusion 360 and off of original 3d scans of one of the show viper models. IMHO, probably as good as Alain Rivard's.
Absolutely no sale of the printed model nor STLs. I monitor Etsy and eBay and will simply get you banned. I sell on these platforms. It's free to the community and the F3d archive is included so you can update it as needed (only on the Printables version).
| Base.stl | 9.7MB | |
| Canopy.stl | 1.0MB | |
| Compressor_Back_1.stl | 2.1MB | |
| Compressor_Back_1_1.stl | 2.1MB | |
| Ejection_Handle.stl | 828.2KB | |
| Ejection_Seat.stl | 31.1MB | |
| Engine_1_Can.stl | 25.1MB | |
| Engine_1_Detail.stl | 15.0MB | |
| Engine_2_Can.stl | 25.1MB | |
| Engine_2_Detail.stl | 15.0MB | |
| Engine_3_can.stl | 26.5MB | |
| Engine_3_Detail.stl | 14.7MB | |
| Engine_Body_1.stl | 2.2MB | |
| Engine_Body_2.stl | 2.3MB | |
| Engine_Body_3.stl | 1.6MB | |
| Engine_Disk_1.stl | 3.4MB | |
| Engine_Disk_2.stl | 3.4MB | |
| Engine_Disk_3.stl | 3.4MB | |
| Engine_Hose_L.stl | 1.5MB | |
| Engine_Hose_R.stl | 1.5MB | |
| Final_Control_Panels.stl | 18.7MB | |
| Floor_Pan.stl | 4.1MB | |
| Floor_Pan_Wire_Spacer.stl | 1.8KB | |
| Fuse_L_Detail_Plate.stl | 15.8MB | |
| Fuse_L_Detail_Plate_1.stl | 15.8MB | |
| Gasser_1.stl | 1.6MB | |
| Gasser_2.stl | 1.6MB | |
| Left_Bottom_Detail_Panel.stl | 8.6MB | |
| Left_Engine_Panel.stl | 11.0MB | |
| Left_Gun.stl | 10.2MB | |
| Left_Wing.stl | 10.2MB | |
| Main_Fuse.stl | 29.8MB | |
| Nose_Insert.stl | 1.9MB | |
| Rear_Engine_Panel.stl | 23.5MB | |
| Rear_Fuselage.stl | 10.9MB | |
| Rear_Panel_1_1.stl | 2.4MB | |
| Rear_Panel_1_1_1.stl | 2.4MB | |
| Right_Bottom_Detail_Panel.stl | 11.2MB | |
| Right_Engine_Panel.stl | 13.4MB | |
| Right_Gun.stl | 10.2MB | |
| Right_Wing.stl | 10.2MB | |
| Stick.stl | 1.2MB | |
| Throttle_Control.stl | 855.1KB | |
| Viper_Top_Wing.stl | 120.8KB |
