Dice tower that can be easily packaged up into the box that also serves as dice catcher.
The felt on the bottom of the box seen in the preview is optional but recommended, the tower have a tendency to slide around otherwise. Some thin grippy material on the bottom edges might also work.
Relies on friction to stay together so do expect some fiddling with the fit post-print for best results. If too tight sand it down very slightly, if too loose a thin layer of CA glue worked for me (flattened it with printer paper).
Not recommended for metal dice, they're simply too heavy in my experience to work well in this.
Need to print 3 Small bouncers, the rest is one each
--
Update 2024-09-20
Added blank sides without decoration for easier modification, directly inspired by thecrazykoala's blank front/back remix
| Collapsible_Dice_Tower.f3d | 5.4MB | |
| Dice_Tower_-_Backplate.stl | 2.7MB | |
| Dice_Tower_-_Bouncer_-_Large.stl | 7.7KB | |
| Dice_Tower_-_Bouncer_-_Small.stl | 4.6KB | |
| Dice_Tower_-_Box.stl | 251.4KB | |
| Dice_Tower_-_Box_Lid.stl | 51.8KB | |
| Dice_Tower_-_Frontplate.stl | 2.4MB | |
| Dice_Tower_-_Sideplate_left.stl | 757.6KB | |
| Dice_Tower_-_Sideplate_left_blank.stl | 169.6KB | |
| Dice_Tower_-_Sideplate_right.stl | 699.6KB | |
| Dice_Tower_-_Sideplate_right_blank.stl | 174.4KB |
