Coleman Instant Event Shade Replacement Part / Joint 3D Printer Model
The file 'Coleman Instant Event Shade Replacement Part / Joint 3D Printer Model' is (stl) file type, size is 1.2MB.
The file 'Coleman Instant Event Shade Replacement Part / Joint 3D Printer Model' is (stl) file type, size is 1.2MB.
Replacement part/joint for the Coleman Instant Event Shade. This part connects the top bar to the two legs.
I printed this in ABS with supports using a 0.5mm nozzle, 0.25mm layer height, 4 walls, and 50% cubic infill (see attached image). I made the screw holes a little tight so they can be drilled to the perfect size for the threading.
I show my best guess at the direction this part should be printed in the attached picture. This worked pretty well for me, and lasted 5 days (4 nights) of camping in 15 mph wind and rain. I'm going to experiment with other printing directions to see if I get better results.
| Coleman_Instant_Event_Shade.stl | 2.7MB |
