I loved the design bz mikeestee https://www.thingiverse.com/thing:2430826 but had some trouble with the separators being so thin they broke.
Also, I needed storage for my Philips hue 2450 coin cells as well as some 2025 and 2016 types.
=> I made the separators a little bigger and flat on top so they are connected well to the sides which also increases the holding strength.
Each tray is labelled on both sides and holds 10 batteries that can easily be pushed out with a finger.
printed on ender 3 pro with 0,2mm layer height PLA
Support touching buildplate (feel free to place blockers for the text or try without)
Ps: I had the springy top part break off on 1 silk filament I tried due to layer separation. If this happens to you, trz reduced cooling or even decrease wall count and increase flow / infill so you have not only parallel lines but e.g. gyroid reaching into those layers. Switching to a non silk filament will probably help as well.
| CoinCell_2016_BatteryHolder.stl | 313.9KB | |
| CoinCell_2025_BatteryHolder.stl | 293.8KB | |
| CoinCell_2032_BatteryHolder.stl | 310.0KB | |
| CoinCell_2450_BatteryHolder.stl | 300.2KB |
